Steel Color: Powder Coated Green (Frames), Orange (Beams & Deck Supports)  Deck Material: Raw Particle Board

Specifications

• •  2 Beam Level Starter Unit

• • Add extra Beam Levels as needed

• • Weight capacities of up to 2,000lbs per Beam Level, UDL

• • Beam Levels are Adjustable in 1½” increments

• •  5/8″ Particle Board Decking Included

• Easy to Assemble!

The post Bulk Rack Starter Units w/ PB Decking appeared first on eshelvingstore.

Steel Color: Powder Coated Green (Frames), Orange (Beams & Deck Supports)  Deck Material: Wire Mesh

Specifications

• •  2 Beam Level Starter Unit

• • Add extra Beam Levels as needed

• • Weight capacities of up to 2,000lbs per Beam Level, UDL

• • Beam Levels are Adjustable in 1½” increments

• •  Wire Mesh Decking Included

• Easy to Assemble!

The post Bulk Rack Starter Units w/ Wire Mesh Decking appeared first on eshelvingstore.

Steel Color: Powder Coated Green (Frames), Orange (Beams & Deck Supports)  Deck Material: Raw Particle Board

Specifications

• •  2 Beam Level Starter Unit

• • Add extra Beam Levels as needed

• • Weight capacities of up to 2,000lbs per Beam Level, UDL

• • Beam Levels are Adjustable in 1½” increments

• •  5/8″ Particle Board Decking Included

• Easy to Assemble!

The post Bulk Rack Starter Units w/ PB Decking appeared first on eshelvingstore.

   

       

Each free-standing pallet rack unit requires two uprights. Uprights may be used as a single end component or in-between two bays (one starter unit and one add-on unit). The upright face is punched every 2”. Capacities listed are based on non-seismic installation and may be reduced depending on load beam configuration. Our Selective Pallet Rack Frames are compatible with Interlake “Old” Style and most Interlake “New” Style Teardrop designs. 

Common Upright Styles:

ORDERING INFORMATION:
Uprights: To determine upright depth, allow 3″ to 4″ pallet overhang both in the front and rear. For example, a 48″ deep pallet would require a 42″ deep upright. To determine the proper height, allow 4″ to 8″ clearance between pallet load and beam. Use the following formula to determine Upright Height: Upright Height = pallet heights (including floor pallet) + clearance heights + height of load beam. Loads on the top level are not included when determining upright height.
Load Beams: Allow a minimum of 3″ clearance between pallet(s) and uprights. For example, two 48″ wide pallets would require 108″ long load beams.*Capacities based on two pallets per level. Addition of a third pallet reduces capacity by 50%.

The post Welded Teardrop Pallet Rack Upright Frames appeared first on eshelvingstore.

Steel Color: Powder Coated Gray
Deck Material: 5/8″ Particle Board

Specifications:

•  Widths: 7′ & 8′ Wide Span (Click here for our 2′ – 6′ Wide Short Span Units)
  
•  Prices start with 3 Shelf Levels per Unit
•  Add Extra Shelf Levels as Needed
•  Available Heights: 60″ (5′) up to 144″ (12′) *Please inquire about CUSTOM heights
• Weight Capacities of up to 1,000lbs per Shelf Level (UDL)
• Shelves are Adjustable in 1½” Increments
•  5/8″ Particle Board Decking Included!
• Easy to Assemble and Accessible from all Four Sides

The post Wide Span Heavy Duty Rivet Shelving w/ Wood Decking appeared first on eshelvingstore.

Steel Color: Powder Coated Green (Frames), Orange (Beams & Deck Supports)  Deck Material: Wire Mesh

Specifications

•  2 Beam Level Starter Unit
• Add extra Beam Levels as needed
• Weight capacities of up to 2,000lbs per Beam Level, UDL
• Beam Levels are Adjustable in 1½” increments
•  Wire Mesh Decking Included
• Easy to Assemble!

The post Bulk Rack Starter Units w/ Wire Mesh Decking appeared first on eshelvingstore.

Post Thickness:  1½” x 1½”
Steel Color: Powder Coated Gray,

The post Rivet Shelving Angle Post appeared first on eshelvingstore.

Specifications

•   Column Measurements: 2″ Wide x “1¼” Deep




•   Uprights allow adjustment of shelf height every 1½”

The post Bulk Rack (FastRack) Upright appeared first on eshelvingstore.