Description

ALL WELDED U.S. Made Interlake Style Teardrop Upright Frames feature 14g Steel, 5″ x 8″ seismic footplates and a capacity of up to 31,000 lbs. per frame.

   

       

Each free-standing pallet rack unit requires two uprights. Uprights may be used as a single end component or in-between two bays (one starter unit and one add-on unit). The upright face is punched every 2”. Capacities listed are based on non-seismic installation and may be reduced depending on load beam configuration. Our Selective Pallet Rack Frames are compatible with Interlake “Old” Style and most Interlake “New” Style Teardrop designs. 

Common Upright Styles:

ORDERING INFORMATION:
Uprights: To determine upright depth, allow 3″ to 4″ pallet overhang both in the front and rear. For example, a 48″ deep pallet would require a 42″ deep upright. To determine the proper height, allow 4″ to 8″ clearance between pallet load and beam. Use the following formula to determine Upright Height: Upright Height = pallet heights (including floor pallet) + clearance heights + height of load beam. Loads on the top level are not included when determining upright height.
Load Beams: Allow a minimum of 3″ clearance between pallet(s) and uprights. For example, two 48″ wide pallets would require 108″ long load beams.*Capacities based on two pallets per level. Addition of a third pallet reduces capacity by 50%.